21-04-2021
Download Aquarius Cmp Series Driver
Support > Software & Drivers
- The volume before you from the series 'Drive Engineering – Practical Implementation' is aimed at technical specialists that proces s servo applications and provides clear infor-mation on the design and theory of operation of common components of servo tech-nology as well as their applications and project planning.
- But, with no Wifi or bluetooth support because Windows 10 have no drivers for the wifi and bluetooth adapter. I've tried to download the boot camp drivers from the Boot Camp Assistant software, no luck. I've tried to download the latest boot camp drivers and installed the broadcom drivers, but still no luck. I've tried Boot Camp Support Software.
- Components & Systems. High performance 1D/2D CMOS and CCD cameras. High accuracy laser profiling, stereo imaging, and Time-of-Flight sensors and cameras.
- Support and Downloads. We truly care about our users and our product. Manuals & datasheets Drivers and tools Official documents.
Cutting Plotters
Software & Drivers
Go to the driver section : Windows driver
Go to the softwares (1) section : Controller, ROBO Master Pro, D-Cut Master
Go to the softwares (2) section : Cutting Master 4, Graphtec Pro Studio, Cutting Master 2, Cutting Master 3, Graphtec Studio
* FC9000, go to the product support page.
* CE7000, go to the product support page.
* CE7000-130AP, go to the product support page.
* CE LITE-50, go to the product support page.
* CE6000 PLUS, go to the product support page.
* FCX2000, go to the product support page.
* FCX4000, go to the product support page.
COOLER MASTER PORTAL V1.01. DOWNLOAD Download Latest Version. DESCRIPTION Supported Products: MK700 series, CK500 series, SK600 series, MasterKeys Pro series.
Drivers
| Cutting Plotters | Windows Driver | ||||||
|---|---|---|---|---|---|---|---|
| Windows 7 (32-bits Edition) | Windows 8.1 (32-bits Edition) | Windows 10 (32-bits Edition) | Windows 7 (64-bits Edition) | Windows 8.1 (64-bits Edition) | Windows 10 (64-bits Edition) | Cprrespon- ding model | |
| CE6000-40 CE6000-60 CE6000-120 CE6000-120AMO | OPS662 (v3.80) | OPS662 (v4.00) | OPS662 (v3.80) | OPS662 (v4.00) | CE6000 | ||
| CE6000-120AP | OPS628 (v10.20) | OPS628 (v10.30) | OPS628 (v10.20) | OPS628 (v10.30) | CE6000 | ||
| FC8600-60 FC8600-75 FC8600-100 FC8600-130 FC8600-160 | OPS662 (v3.80) | OPS662 (v4.00) | OPS662 (v3.80) | OPS662 (v4.00) | FC8600 | ||
| FC2250-60 FC2250-120 FC2250-180 | FC2250 | ||||||
| FC4500-50 FC4510-60 FC4550-50 | FC4500 | ||||||
| CE2000-60 CE2000-120 | OPS628 (v10.20) | N/A | OPS628 (v10.20) | N/A | CE2000 | ||
| CE2000-120AP | CE2000 | ||||||
| CE3000-40 CE3000-60 CE3000-120 | CE3000 | ||||||
| CE3000-120AP | CE3000 | ||||||
| CE3000Mk2-60 CE3000Mk2-120 | OPS662 (v3.00) | N/A | OPS662 (v3.00) | N/A | CE3000Mk2 | ||
| CE5000-60 CE5000-120 | OPS662 (v3.00) | OPS662 (v3.00) | CE5000 | ||||
| CE5000-120AP | OPS628 (v10.20) | OPS628 (v10.20) | CE5000 | ||||
| FC2231-60 FC2231-90 FC2321-EX FC2232-60 FC2232-90 FC2232-EX | OPS628 (v10.20) | N/A | OPS628 (v10.20) | N/A | FC2230 | ||
| FC2240-60 FC2240-120 FC2240-180 | OPS662 (v3.00) | N/A | OPS662 (v3.00) | N/A | FC2240 | ||
| FC3600-120 | OPS628 (v10.20) | N/A | OPS628 (v10.20) | N/A | FC3600 | ||
| FC4200-50 FC4200-60 FC4210-60 | OPS628 (v10.20) | N/A | OPS628 (v10.20) | N/A | FC4200 | ||
| FC5100-75 FC5100-100 FC5100-130 FC5100-150 | OPS628 (v10.20) | N/A | OPS628 (v10.20) | N/A | FC5100 | ||
| FC5100A-75 FC5100A-100 FC5100A-130 FC5100A-150 | FC5100 | ||||||
| FC7000-75 FC7000-100 FC7000-130 FC7000-160 | OPS662 (v3.00) | N/A | OPS662 (v3.00) | N/A | FC7000 | ||
| FC7000Mk2-60 FC7000Mk2-75 FC7000Mk2-100 FC7000Mk2-130 FC7000Mk2-160 | FC7000 | ||||||
| FC8000-60 FC8000-75 FC8000-100 FC8000-130 FC8000-160 | OPS662 (v3.00) | OPS662 (v3.00) | FC8000 | ||||
| FC612-09 | OPS628 (v10.20) | N/A | OPS628 (v10.20) | N/A | FC612 | ||
Notes/Explanations:
- 1.
- On driver and software, the file is compressed in the ZIP format. It is required to decompress before use.
- 2.
- On driver and software, the language is in English.
- 3.
- On driver and software, the Macintosh OS is not supported exclude the Cutting Master 2 plug-in software.
Softwares
| Cutting Plotters | Cutting Plotter Controller | ROBO Master Pro | D-Cut Master | |||
|---|---|---|---|---|---|---|
| Windows 7 / 8.1 (32 & 64-bits Edition) | Windows 10 (32 & 64-bits Edition) | Windows 7 (32 & 64-bits Edition) | Windows 8.1 / 10 (32 & 64-bits Edition) | Windows 7 (32 & 64-bits Edition) | Windows 8.1 / 10 (32 & 64-bits Edition) | |
| CE6000-40 CE6000-60 CE6000-120 CE6000-120AMO | OPS676 (v1.40B) | N/A | N/A | |||
| Firmware version 1.60 is required (CE6000 Firmware v2.61) Manual for CE6000-40/60/120/120AMO (CE6000-UM-152-01) | ||||||
| CE6000-120AP | N/A | N/A | N/A | |||
| Firmware version v1.50 is required (CE6000-120AP Firmware v2.00) User manual for CE6000-120AP (CE6000AP-UM-152-01) | ||||||
| FC8600-60 FC8600-75 FC8600-100 FC8600-130 FC8600-160 | OPS675 (v1.50B) | N/A | N/A | |||
| FC2250-60 FC2250-120 FC2250-180 | N/A | N/A | OPS639 (v2.12) | N/A | ||
| FC4500-50 FC4510-60 FC4550-50 | ||||||
| CE2000-60 CE2000-120 | N/A | N/A | N/A | |||
| CE2000-120AP | N/A | N/A | N/A | |||
| CE3000-40 CE3000-60 CE3000-120 | N/A | N/A | N/A | |||
| CE3000-120AP | N/A | N/A | N/A | |||
| CE3000Mk2-60 CE3000Mk2-120 | N/A | N/A | N/A | |||
| CE5000-60 CE5000-120 | OPS664 (v2.20B) | OPS661 (v4.60) | N/A | N/A | ||
| CE5000-120AP | N/A | N/A | N/A | |||
| FC2231-60 FC2231-90 FC2321-EX FC2232-60 FC2232-90 FC2232-EX | N/A | N/A | OPS639 (v2.12) | N/A | ||
| FC2240-60 FC2240-120 FC2240-180 | N/A | N/A | OPS639 (v2.12) | N/A | ||
| FC3600-120 | N/A | N/A | N/A | |||
| FC4200-50 FC4200-60 FC4210-60 | N/A | N/A | OPS639 (v2.12) | N/A | ||
| FC5100-75 FC5100-100 FC5100-130 FC5100-150 | N/A | N/A | N/A | |||
| FC5100A-75 FC5100A-100 FC5100A-130 FC5100A-150 | N/A | N/A | N/A | |||
| FC7000-75 FC7000-100 FC7000-130 FC7000-160 | OPS664 (v2.20B) | N/A | N/A | N/A | ||
| FC7000Mk2-60 FC7000Mk2-75 FC7000Mk2-100 FC7000Mk2-130 FC7000Mk2-160 | ||||||
| FC8000-60 FC8000-75 FC8000-100 FC8000-130 FC8000-160 | OPS675 (v1.50B) | N/A | N/A | |||
| FC612-09 | N/A | N/A | OPS639 (v2.12) | N/A | ||
Download Aquarius Cmp Series Drivers
Notes/Explanations:
- 1.
- On driver and software, the file is compressed in the ZIP format. It is required to decompress before use.
- 2.
- On driver and software, the language is in English.
- 3.
- On driver and software, the Macintosh OS is not supported exclude the Cutting Master 2 plug-in software.
- 4.
- On software, it is run in the WOW64 mode when the 64-bits Windows OS is used.
Softwares
| Cutting Plotters | Cutting Master 4 | Graphtec Pro Studio | |
|---|---|---|---|
| Windows 7 / 8.1 / 10 (32 & 64-bits Edition) | Macintosh OS10.7 - 10.15 | Windows 7 / 8.1 / 10 (32 & 64-bits Edition) | |
| FC8600-60 FC8600-75 FC8600-100 FC8600-130 FC8600-160 | Cutting Master 4 for Windows | Cutting Master 4 for Macintosh | Graphtec Pro Studio for Windows |
| FC4500-50 FC4510-60 FC4550-50 | Cutting Master 4 for Windows | Cutting Master 4 for Macintosh | Graphtec Pro Studio for Windows |
| Cutting Plotters | Cutting Master 2 | Cutting Master 3 | Graphtec Studio | ||||
|---|---|---|---|---|---|---|---|
| Windows 7/ 8.1 (32 & 64-bits Edition) | Windows 10 (32 & 64-bits Edition) | Macintosh OS10.4 - 10.10 | Windows 7/ 8.1/ 10 (32 & 64-bits Edition) | Macintosh OS10.5 -10.11 macOS 10.12 | Windows 7/ 8.1/ 10 (32 & 64-bits Edition) | Macintosh OS10.6 -10.15 | |
| CE6000-40 CE6000-60 CE6000-120 CE6000-120AMO | C-Master2(W) (v2.00) | TBD | C-Master2(M) (v1.99) | Cutting Master 3 for Windows | Cutting Master 3 for Macintosh | Graphtec Studio for Windows | Graphtec Studio for Macintosh |
| CE6000-120AP | N/A | N/A | N/A | ||||
| FC8600-60 FC8600-75 FC8600-100 FC8600-130 FC8600-160 | C-Master2(W) (v2.00) | TBD | C-Master2(M) (v1.99) | Cutting Master 3 for Windows | Cutting Master 3 for Macintosh | Graphtec Studio for Windows | Graphtec Studio for Macintosh |
| Firmware version 2.10 or later is required (FC8600 Firmware v3.10) | |||||||
| FC2250-60 FC2250-120 FC2250-180 | C-Master2(W) (v2.00) | TBD | C-Master2(M) (v1.99) | Cutting Master 3 for Windows | Cutting Master 3 for Macintosh | Graphtec Studio for Windows | Graphtec Studio for Macintosh |
| Firmware version 3.90 or later is required (FC2250 Firmware v4.50) | |||||||
| FC4500-50 FC4510-60 FC4550-50 | C-Master2(W) (v2.00) | TBD | C-Master2(M) (v1.99) | Cutting Master 3 for Windows | Cutting Master 3 for Macintosh | Graphtec Studio for Windows | Graphtec Studio for Macintosh |
| Firmware version 1.92 or later is required (FC4500 Firmware v2.70) | |||||||
| CE2000-60 CE2000-120 | N/A | N/A | N/A | ||||
| CE2000-120AP | N/A | N/A | N/A | ||||
| CE3000-40 CE3000-60 CE3000-120 | N/A | N/A | N/A | ||||
| CE3000-120AP | N/A | N/A | N/A | ||||
| CE3000Mk2-60 CE3000Mk2-120 | N/A | N/A | N/A | ||||
| CE5000-60 CE5000-120 | C-Master2(W) (v2.00) | TBD | C-Master2(M) (v1.99) | Cutting Master 3 for Windows | Cutting Master 3 for Macintosh | Graphtec Studio for Windows> | Graphtec Studio for Macintosh |
| When current firmware is previous of version 3.80, version 3.90 is required (CE5000 Firmware v4.00) When current firmware is version 5.00 or later, version 6.20 is required (CE5000 Firmware v6.40) | |||||||
| CE5000-120AP | N/A | N/A | N/A | ||||
| FC2231-60 FC2231-90 FC2321-EX FC2232-60 FC2232-90 FC2232-EX | N/A | N/A | N/A | ||||
| FC2240-60 FC2240-120 FC2240-180 | N/A | N/A | N/A | ||||
| FC3600-120 | N/A | N/A | N/A | ||||
| FC4200-50 FC4200-60 FC4210-60 | N/A | N/A | N/A | ||||
| FC5100-75 FC5100-100 FC5100-130 FC5100-150 | N/A | N/A | N/A | ||||
| FC5100A-75 FC5100A-100 FC5100A-130 FC5100A-150 | N/A | N/A | N/A | ||||
| FC8000-60 FC8000-75 FC8000-100 FC8000-130 FC8000-160 | C-Master2(W) (v2.00) | TBD | C-Master2(M) (v1.99) | Cutting Master 3 for Windows | Cutting Master 3 for Macintosh | Graphtec Studio for Windows | Graphtec Studio for Macintosh |
| Firmware version 3.10 or later is required (FC8000 Firmware v3.50) | |||||||
| FC612-09 | N/A | N/A | N/A | ||||
Download Aquarius Cmp Series Driver Guide
Notes/Explanations:
Download Aquarius Cmp Series Driver Updater
- 1.
- On driver and software, the file is compressed in the ZIP format. It is required to decompress before use.
- 2.
- On driver and software, the language is in English.
- 3.
- On driver and software, the Macintosh OS is not supported exclude the Cutting Master 2 plug-in software.
- 4.
- On software, it is run in the WOW64 mode when the 64-bits Windows OS is used.
- 5.
- In plug-in software Cutting Master 2 and Cutting Master 3, new version will not be released even if the OS or application software is updated. It is recommended using plug-in software Cutting Master 4 corresponded to new OS or application software if possible.